Just like is says, I need a dana 60 yoke (or two if you have them).
Also, what trucks came with 1350 u-joints? everytime I ask for them at a parts store, they have no idea what they are. they just want to know what it fits.
Just like is says, I need a dana 60 yoke (or two if you have them).
Also, what trucks came with 1350 u-joints? everytime I ask for them at a parts store, they have no idea what they are. they just want to know what it fits.
Jordan R. Bucknum
979-575-4161
2013 GMC Sierra
2013 Express G-ride
2011 Dodge Ram
2008 F350 4x4
1990 GMC c1500 SBC w/2stages of giggle juice
1977 W300 60/70, 440, 727, 37", H1s, 4.88
1966 VW rail, 1915cc turbo
1974 CJ5 (my old rig, again)
etc..
1 ton chevy.... for decades till at least 2000
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
I've had the same problem. Look up the spicer p/n, then cross reference that to their p/n. You may have to xref it yourself on google cause sometimes they can't even do that.
http://www2.dana.com/Expert/wc.dll?h...edsec~2~13~06~
Last edited by mudtoy67; 06-30-2010 at 11:01 PM.
BDR
just call high angle drive line or check out his website at http://www.highangledriveline.com/yokes.html there are other places to get them at but jess has the best customer service from my experience and from others i have talked to
Brazos Valley Drivelines carries Spicer u-joints, maybe yokes too.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
not by anyone who builds driveshafts, male or female.
Jess will go out of his way most every time to discuss what you need for your setup, and almost refuses to sell you something he thinks you don't need. While this can be a bit irritating at times, I bet this helps a good many folks out from spending needlessly. I have seen folks call him Saturday afternoon and get brainpicked for half an hour also. Not many folks will even answer their phone after 5 on Friday anyways.
he has hooked me up a few times, one time i landed on my driveshaft and he fixed it for free, all i had to do was pay shipping there, and there is no way this was under warrenty, i even told him i knew it was my fault and he said he would hook me up, second time was trying to figure out a 32 spline flange for my 205 and he told me junkyard parts to get instead of his 100 dollar bling ones which saved me about 75 bucks
I have or had a bunch of 1330 yokes, not sure if I still do, may have given them away.
Hey don't be giving my yokes away Kopecki!!
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!