Sloth

[TdmayfieldIV]

Front driveshaft finally gave up

[TdmayfieldIV]

[TdmayfieldIV]

Tore down the new driveshaft today. Centering pin on the weld yoke looks good, centering yoke is still tight. All I need is some new joints and it'll be good to go.




Chromoly?, no thanks, 300m? ***** ****. 24K is the where it's at:grinpimp:

[BroncoJo]

That will be worth a ton at scrap!

[TdmayfieldIV]

I went to burleson on my way home from the airport and picked up these, only 2 of them, but they were $50 for both with tires.



Then he started showing me other stuff he had for sale and I snagged all of this for $50



So now I have
-Half of the gears (front only)
-Half of the Steering ( need a ram)
-Half of the wheels ( need two more and some centers)
-Half of the body done

less than half the motivation.......

[BroncoJo]

So now I have
-Half of the gears (front only)
-Half of the Steering ( need a ram)
-Half of the wheels ( need two more and some centers)
-Half of the body done

less than half the motivation.......

That's funny, keep it up

edit- You also have Half a roll cage (roll bar)

second edit- This list can go on:

Half 42's (two bald)
Half headlights (one broker)
Half the way locked (just rear)
Half way on front suspension (longer shocks + softer springs)
Half bumpers (just rear)

[redcagepatrol]

I have a PSC Ram that I need to sell. I think it is 2.25 x 8"

[TdmayfieldIV]

new driveshaft is in.

Tip:

Put the caps on the u joint before hammering in the caps on the top of the double cardan joint.


She's grounded from mud until october.


She's grounded from mud until october.

[TdmayfieldIV]

Pretty good for a couple of hours driving and $75

[Seth]

(This is the part where you say thank you)

[TdmayfieldIV]

Ok manners police. I said it in person. But thanks Scott.

[Seth]

Ok manners police. I said it in person. But thanks Scott.

I think of it more like giving feedback on ebay in this case.

[TdmayfieldIV]

[BroncoJo]

How long is that hose?

[TdmayfieldIV]

Long enough to do rear steer