Soon to be diesel smoke metallic
Is that next to gay-boy green in the diesel douche catalog?
Zach do you just sit around and think of douchy things to say? Maybe if you cut that **** out and helped people wrench you wouldn't be vice president for the 3rd time in a row.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Who the **** am I gonna 'help' wrench? Nobody ever asks for my help and I can guarandamntee you that nobody wants it. And like I give a ****...
if you replaced the 6" coils with 4" then yes it will do that, you will need to get some adjustable camber bushings that will correct the issue. most alignment shops should be able to do that
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
Like Tommy said, if the radius arms are for 6" and you have 4" coils it will do that. You might be able to correct it at an alignment shop. Too bad Sparling sold my 6" coils to the scrapper...
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
What was the last move you made with the truck before you noticed this? Was it backing up? Try pulling forward and see if it looks better. Mine and Karl's would look like the that when driven in reverse...it's just something TTBs do.Any TTB guru's:
I seem to have some serious camber issues, could it be 4 inch coils in the 6 inch lift holes or could it be something corrected by an alignment?
If it's like that all the time...then yes you might be able to align it with camber bushings but you might as well move the traction beams to the 4" lift holes.
BDR
TTB, it does what it wants!
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
That was a bad time in my life when I scrapped ttb, however my brother has the lift stuff to go on his ttb someday.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat