Being able to fit in a garage is nice.
Being able to fit in a garage is nice.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Fitting in a garage is over rated. Turning radius is not.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
I built my jeep to fit in the garage with the 37s. But now have the 42s so it no fit no more. I have no height restrictions at my Victoria house for storing it covered by my shop now though.
Jonathan Tate
361.676.6466
2010 Dodge Ram 2500 4x4 6.7 MegaCab
2004 Jeep TJ
1992 Jeep YJ
2008 Jeep JKU
2013 Ford Explorer Sport (mama's go fast car)
Fitting in a garage is very nice keeps the Jeep dry when it rains.
Originally Posted by afroman006Originally Posted by afroman006
#jeepprobs
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Zeb where did you get your steering stabilizer?
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
I like keeping my jeep inside too! Can i be a part of the jeepers! JB do you even jeep?
Last edited by zebvance; 10-10-2013 at 01:40 PM.
1988 Comanche auto, 4.0, 4x4, 8.8 rear trussed, Dana 30 trussed, SYE np231, Serious Offroad long arms, 9.5" of lift, 35's, lockers
After that I went on to install the one ton steering. In order to install this I had to drill out the tie rod mounting holes in the knuckles and pit man arm. I drilled them out to 7/8s and put a tapered insert in it. The knuckles were pretty easy to do. the cast seemed fairly soft.
Old VS New
Drilling the Knuckles
The Pitman arm did not go as easily though. Snapped my two Machining bits that were $100 buck a piece then I went though about 4 Harbor freight bits before I got the job done...
And here is the finished product!
1988 Comanche auto, 4.0, 4x4, 8.8 rear trussed, Dana 30 trussed, SYE np231, Serious Offroad long arms, 9.5" of lift, 35's, lockers
1988 Comanche auto, 4.0, 4x4, 8.8 rear trussed, Dana 30 trussed, SYE np231, Serious Offroad long arms, 9.5" of lift, 35's, lockers