will finish it up tomorrow with a 2x3 rectagular box steel spanning the frame, resting/welded to the hangars and frame...
will finish it up tomorrow with a 2x3 rectagular box steel spanning the frame, resting/welded to the hangars and frame...
92 YJ
04 F-150 4x4
11 F-250 4x4
Welds look pretty good from what I can see. When did you learn how to weld?
1988 Blazer...RIP
are you going to put anything between the two frame rails. the frame in the front is kinda weak from what i have been told. Thats why i put a crossmember in there and also the bumper acts as a second cross member.
also i plan on redoing mine all over this winter should be fun. i am gonna slam her down about 1 inch should be fun.
Wasn't that only for TTB? Since ttb puts force on the opposing frame rail? But if you have a straight axle the frame should be like any other frame?
1988 Blazer...RIP
thewre still isnt any real front crossmember in those year model trucks.
Steven W
02 Dodge 2500
82 CJ-7 - sitting in a field...
"....Your theory is f*cked up like a football bat...."
i have broke my frame up front 3 times... i suggest bracing it
I can't weld. I tried and sucked. I found a friend of a friend up here to help me out. We drank some beers and finished waht is in the pics in about 2 hours. Tomorrow we will weld in the crossmember thing. It is just easier to do it this way then cutting out gussets and such and welding them to the hangar/frame. SHould be stronger as well.
There is the engine crossmember, which will be cut with the plasma tomorrow. Not all of it, just the area where the diff would hit.
92 YJ
04 F-150 4x4
11 F-250 4x4
Originally posted by JBrown89
will finish it up tomorrow with a 2x3 rectagular box steel spanning the frame, resting/welded to the hangars and frame...
92 YJ
04 F-150 4x4
11 F-250 4x4
pass. side welds
92 YJ
04 F-150 4x4
11 F-250 4x4
done
92 YJ
04 F-150 4x4
11 F-250 4x4
cut about 5-6inches out of the crossmember. I will clean it up withe the grinder tomorrow.
92 YJ
04 F-150 4x4
11 F-250 4x4
Nice looking welds. Good job so far.
hell i've got that same nasty looking crossmember on my ford. maybe it'll get a solid axle swap
...
robert I think you've done enough damage to one vehicle!!!
1988 Blazer...RIP