Ok here is the scope of work for getting the Klogger "Trail Rated"
Things to do on the Klogger:
Mandatory
1. Install rear Axle
2. Install and bleed brakes on rear axle
3. Remove/change gears in front axle from 3.00 to 3.55, w/ new u-joints
4. load cooler
Optional
1. Check if heater works
2. Install 2nd row suburban seating in bed
3. Remove 8000 lbs winch from trailer and make something to hold it on the Klogger
4. Fix radio/CB, right now they are just jammed in the dash
5. Get working headlights/brake lights
6. Install some new dents
Things to do on the F250
1. Turn front rotors (they got a warp)
2. Fix brake controller (short somewhere)
3. Fix reverse lights, so I can get it inspected
Things to do on the Trailer
1. Remove winch for above mentioned reason
2. Possible install some lights on the trailer
Here we go!