True. I guess I just need to get my braking uterus powered up and learn my Tcase. I think Andy and I already modded the 205 for Front WD, but I don't think I've ever used it.Originally Posted by chevsu
True. I guess I just need to get my braking uterus powered up and learn my Tcase. I think Andy and I already modded the 205 for Front WD, but I don't think I've ever used it.Originally Posted by chevsu
The disco ball in my mouth, insinuates I'm ballin'
Sure. Come on up. I'm sure it's online somewhere else besides Pirate.Originally Posted by redcagepatrol
The disco ball in my mouth, insinuates I'm ballin'
well pirate is back online now
Originally Posted by afroman006Originally Posted by afroman006
it doesn't show the difference. It just says that the Chevys are 1.5" thick and the Dodge are 1.25. That's 0.25" of my problem (assuming the wear surface starts in the same place) - still have another 5/16" to go...
Scott, FTAC '99
'62 Nissan Patrol 4-seat Twisted Customs Buggy
'89 "CJ-7" - Her trail rig
'05 Toyota Tacoma 4x4 TRD - her daily driver...
'08 Dodge 2500 Mega Cab 6.7 Diesel 4x4
scott.schubring@williams.com
The office sucks - I wanna go wheeling!
Can you take a picture of what you need measured? I guess I'm not exactly sure on what measurement you need. I can take measurements of the Chevy 60 sitting under my Jeep and I can get a few pictures of the brake setup if you need it.
I need the total width of the rotor. If the rotor was off the axle and sitting flat on a table, you would measure from the table to the highest part of the rotor. I'll try to get a pic tonight.
Thanks
Scott, FTAC '99
'62 Nissan Patrol 4-seat Twisted Customs Buggy
'89 "CJ-7" - Her trail rig
'05 Toyota Tacoma 4x4 TRD - her daily driver...
'08 Dodge 2500 Mega Cab 6.7 Diesel 4x4
scott.schubring@williams.com
The office sucks - I wanna go wheeling!
OK,
as for the hubs - the ones I got from the junkyard must be Ford hubs... I'll find some Chevy crap
Ok, new problem
I now have a Ford HP D60. The "CJ" that I am building can be driver or pass drop - pretty sure that I can still call and make the change on the t-case order.
My Patrol is a Passenger drop. I don't plan on changing the T-case any time soon.
Should I start over (shaving the Ford D60 and modifying the cover - buy shafts etc...) for that axle, or should I continue on my path with the Dodge axle?
Should I sell the shaved Dodge 60 housing in x-change for a non shaved housing and make a rear steer axle using a Ford 9" center for the Patrol? I would only need to change the inner shafts. I need the housing for "C"'s and tube I think.
Even though I don't want to re-do any work (and spend the money building another axle), I think that the best option would be to shave the Ford D60, and save the Dodge one for the front of the Patrol.
What do ya'll think I should do?
Scott, FTAC '99
'62 Nissan Patrol 4-seat Twisted Customs Buggy
'89 "CJ-7" - Her trail rig
'05 Toyota Tacoma 4x4 TRD - her daily driver...
'08 Dodge 2500 Mega Cab 6.7 Diesel 4x4
scott.schubring@williams.com
The office sucks - I wanna go wheeling!
put ford 60 in lynda's jeep, and dodge shaved one in the patrol, but thats just me, but what the hell do i know.
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
Put the ford under the CJ and let me have the dodge one.
Did you talk to you friend about the one he had.
OK,
after buying a Jeep, selling it, buying a F250, parting it out and getting rid of it, I have finially started on the Jeep.
I moved Lynda's YJ into the driveway, moved the Patrol to the other side of the garage and have started on the leaf spring mounts on the frame.
I got the front spring mounts done last night, next up, the front shackle mounts in the frame.
Scott, FTAC '99
'62 Nissan Patrol 4-seat Twisted Customs Buggy
'89 "CJ-7" - Her trail rig
'05 Toyota Tacoma 4x4 TRD - her daily driver...
'08 Dodge 2500 Mega Cab 6.7 Diesel 4x4
scott.schubring@williams.com
The office sucks - I wanna go wheeling!
looks good
Originally Posted by afroman006Originally Posted by afroman006
oh damn, i seem to remember a thread that started similar to this a couple of years ago........here it is!
Another rig.....Scott this must be like a woman going back into the labor room....how does it feel?