Roxanne: 1985 Cj-7

[mudtoy67]

A set of Yukon 297x Superjoints
http://eastcoastgearsupply.com/i-135...er-joints.html
$250 shipped

A pair of Superior EVO 4340 d-44 stub shafts
http://www.superioraxlegear.com/stub...t-p-14500.html
$200 shipped

M.O.R.E. steering box relocation bracket
http://www.mountainoffroad.com/_e/St..._CJ_7_CJ_8.htm
$80 shipped

Great Lakes off-road Ford 9" Pinion guard
http://www.greatlakeoffroad.com/GLO-...oke-Guard.html
$60 shipped

Superwinch LP8500 with mounting plate, roller fairlead, steel hawse fairlead, snatch block and two d-rings
http://www.superwinch.com/products/p...0.0.0.0?pp=25&
$400 pickup

Two H3r 2.5lb dry chemical fire extinguishers
http://www.4wheelparts.com/Tools/2-5...t_pn=H3RMX250B
$109 shipped

Tuffy Deluxe 6.5" wide stereo console
http://www.tuffyproducts.com/p-95-02...6-12-wide.aspx
$100 shipped

Rockstomper behind axle dana 44 highsteer arms with 1" spacers and 4" studs
http://www.rockstomper.com/catalog/s.../highsteer.htm
$175 shipped

JB conversion:
4:1 gear set
http://www.jbconversions.com/products/dana300/

32 spline rear output with 1310 cv yoke
http://www.jbconversions.com/product...0/rear_out.php

32 spline front output with 1310 standard yoke
http://www.jbconversions.com/product.../front_out.php

Clocking kit with 23 spline input
http://www.jbconversions.com/products/dana300/plate.php

Full rebuild kit
http://www.jbconversions.com/product...00/rebuild.php

Novak Twin stick kit with boot
http://www.novak-adapt.com/catalog/d...twin_stick.htm

High-angle Driveline, 2 1350 u-joint 32 spline output flanges
http://www.highangledriveline.com/new_products.html

ALL OF IT FOR $1100 shipped!

Learning to drive stick - priceless...

[85cj7]

Learning to drive stick - priceless...

I found out to combat case flex with the d-300 that people are using the inspection cover from a d-20 which is thicker and hold greater capacity.
I'm thinking of going this route as well as making a 1/4" flange that extends out to to the rear output.
http://www.4wheelers.com/jeep-dana-2...43-p-2610.html

However, I found these and could also go this route. Just think mine would be stronger and cheaper.
http://www.wildhorses4x4.com/product..._Transfer_Case
http://www.bjsoffroad.com/CartGenie/prod-1048.htm

This is a d-20 but the same thing could easily be built for the d-300.