Page 6 of 8 FirstFirst ... 2 3 4 5 6 7 8 LastLast
Results 76 to 90 of 109

Thread: What do you have to do before clayton?

  1. #76
    Sand Man Shaggy's Avatar
    Join Date
    Dec 2007
    Location
    San Antonio or Victoria
    Posts
    2,337
    Oh and the first top went on the Tate Jeep no problem. It helps when it isn't in the 30s outside
    Jonathan Tate
    361.676.6466
    2010 Dodge Ram 2500 4x4 6.7 MegaCab
    2004 Jeep TJ
    1992 Jeep YJ
    2008 Jeep JKU
    2013 Ford Explorer Sport (mama's go fast car)

  2. #77
    Big Baller 85cj7's Avatar
    Join Date
    Sep 2006
    Location
    The Big 'D'
    Posts
    3,900
    Quote Originally Posted by 85cj7 View Post
    Replace front bent leaf springs with new RE-1.5 springs.
    Replace header flange gaskets to fix annoying exhaust leak.
    Replace valve cover gaskets to fix annoying oil leak.

    None is really necessary. We'll see how motivated I feel.
    The jeep could still use the exhaust and valve cover gaskets replaced. . . .


    I also need to replace my 'quick fix' grade 8 bolts with ARP studs for the driver side high steer arm.

    Load it up with beer and gas and I'm good to go.
    Quote Originally Posted by jerryg79 View Post
    i dont speak australian.
    Quote Originally Posted by jerryg79 View Post
    seacrest, you are my hero!

  3. #78
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    Check all the oils, check the u-joints, and load the cooler. Taking the scout, jeep still needs work.
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  4. #79
    Resident Ricer Sparling's Avatar
    Join Date
    Jan 2010
    Posts
    2,782
    Traction bars, rear drivershaft, lots of lights, and cupholders
    '91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat

  5. #80
    Hazaa Fredo's Avatar
    Join Date
    Apr 2002
    Location
    at the parts store, confusing the **** out of the guy.
    Posts
    4,980
    Lurch:
    -Rewire Control switches for fans, lights, OBA
    -Replace headlight switch
    -Replace entire cooling system (done)
    -Remove "rebuilt" radiator that is apparently bad and install new radiator
    -Wait for new radiator
    -replace power steering pressure hose and return
    -get shorter belts for new alternator pulley
    -Disassemble front axle and repack wheel bearings
    -change gear oil in front axle
    -grease all ujoints
    -change engine oil and filter
    -install new stereo head unit
    -install different windshield frame and windshield

    Trailer:
    - Weld deck plate that has broken loose
    - Get tire with nail in it patched
    - Repack bearings and inspect suspension
    - Replace clearance lights on rear

    Tahoe
    - Reinstall transmission, exhaust, etc associated with pulling out the trans.
    -waiting on trans to be finished being built
    -waiting on torque converter to be built and shipped in
    - change engine oil
    - rotate tires

    I'm sure there is some stuff I'm forgetting...
    "You know, this car is so fast, that giving Corvette owners this car, is kinda like giving an AK-47 to a pysch ward."

    -Ron Fellows (Corvette C6R Team Driver)

  6. #81
    Teaching America's youth RCcola55's Avatar
    Join Date
    Sep 2004
    Location
    with your mom
    Posts
    2,815
    -Distill 30gal of mash
    -pack
    Ryan Clarke
    (214)695-7901

  7. #82
    ill be your pickup man
    Join Date
    Apr 2002
    Location
    San Antonio, Tx
    Posts
    5,785
    Jeep:
    Figure out what is wrong if anything with transmission
    exhaust leak
    put top on
    Durango alternator
    install PS pump skid thing
    Clean insides of all Shiloh mud
    Inspection sticker is out.

    Trailer:
    Think its good
    92 YJ
    04 F-150 4x4
    11 F-250 4x4

  8. #83
    Rock and Roll AggieTJ2007's Avatar
    Join Date
    Oct 2004
    Location
    Headed back to the Big D
    Posts
    6,182
    Jeep

    -finish welding stuff
    -put front axle back together
    -top off fluids
    -change oil
    -build skid plate for the motor/trans/transfer cases

    -doors and a windshield would be nice but I don't know if I will get there.

    Trailer
    -figure out why the brakes aren't working/ replace coils

    Truck
    -Change oil
    -Rotate tires
    Last edited by AggieTJ2007; 12-03-2014 at 08:30 PM.
    Quote Originally Posted by afroman006
    Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
    Quote Originally Posted by afroman006
    So driving by brail is why your jeep looks the way it does eh?

  9. #84
    Tommy sucks Sharpe's Avatar
    Join Date
    Aug 2004
    Location
    Corpus Christi
    Posts
    8,826
    Quote Originally Posted by JB View Post
    Jeep:
    Figure out what is wrong if anything with transmission
    exhaust leak
    put top on
    Durango alternator
    install PS pump skid thing
    Clean insides of all Shiloh mud
    Inspection sticker is out.

    Trailer:
    Think its good
    Put Lucas in the transmission to stretch it out for one more trip if it's seriously ****ed.
    On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"

  10. #85
    Hazaa Fredo's Avatar
    Join Date
    Apr 2002
    Location
    at the parts store, confusing the **** out of the guy.
    Posts
    4,980
    Quote Originally Posted by Fredo View Post
    Lurch:
    -Rewire Control switches for fans, lights, OBA
    -Replace headlight switch
    -Replace entire cooling system
    -Remove "rebuilt" radiator that is apparently bad and install new radiator
    -Wait for new radiator

    -replace power steering pressure hose and return
    -get shorter belts for new alternator pulley
    -Disassemble front axle and repack wheel bearings
    -change gear oil in front axle
    -grease all ujoints
    -change engine oil and filter
    -modify oil pan for hydraulic ram clearance
    -replace hydraulic assist ram

    -install new stereo head unit
    -install different windshield frame and windshield


    Trailer:
    - Weld deck plate that has broken loose
    - Get tire with nail in it patched
    - Repack bearings and inspect suspension
    - Replace clearance lights on rear


    Tahoe
    - Reinstall transmission, exhaust, etc associated with pulling out the trans.
    -waiting on trans to be finished being built
    -waiting on torque converter to be built and shipped in
    - change engine oil
    - rotate tires

    I'm sure there is some stuff I'm forgetting...
    Finished some stuff, found some other stuff, still waiting on parts. The stuff in red still needs to be done. Starting to wonder if going this year is worth it.
    "You know, this car is so fast, that giving Corvette owners this car, is kinda like giving an AK-47 to a pysch ward."

    -Ron Fellows (Corvette C6R Team Driver)

  11. #86
    sideways again... redcagepatrol's Avatar
    Join Date
    Apr 2002
    Location
    H-TOWN
    Posts
    4,270
    - finish wiring buggy from scratch
    - test wiring, fix anything that doesn't work
    - install steering column
    - install dash
    - final align axles to chassis, make sure it's all square
    - cut down extra length of bolts at link connections
    - put in heat shield on backside of interior panels
    - install driveshafts
    - install panels, seats, center console, seatbelts, etc... Finish assembly
    - put in brake fluid, bleed brakes
    - put in gear oil
    - N2 in shocks
    - test drive, pray that everything works
    - put water in front tires
    - load on trailer

    - pray that Dodge and trailer and Lynda's Jeep are good to go...
    Scott, FTAC '99
    '62 Nissan Patrol 4-seat Twisted Customs Buggy
    '89 "CJ-7" - Her trail rig
    '05 Toyota Tacoma 4x4 TRD - her daily driver...
    '08 Dodge 2500 Mega Cab 6.7 Diesel 4x4
    scott.schubring@williams.com

    The office sucks - I wanna go wheeling!

  12. #87
    Big Baller 85cj7's Avatar
    Join Date
    Sep 2006
    Location
    The Big 'D'
    Posts
    3,900
    Quote Originally Posted by redcagepatrol View Post
    - finish wiring buggy from scratch
    - test wiring, fix anything that doesn't work
    - install steering column
    - install dash
    - final align axles to chassis, make sure it's all square
    - cut down extra length of bolts at link connections
    - put in heat shield on backside of interior panels
    - install driveshafts
    - install panels, seats, center console, seatbelts, etc... Finish assembly
    - put in brake fluid, bleed brakes
    - put in gear oil
    - N2 in shocks
    - test drive, pray that everything works
    - put water in front tires
    - load on trailer

    - pray that Dodge and trailer and Lynda's Jeep are good to go...
    water in front tires?
    Quote Originally Posted by jerryg79 View Post
    i dont speak australian.
    Quote Originally Posted by jerryg79 View Post
    seacrest, you are my hero!

  13. #88
    Resident Ricer Sparling's Avatar
    Join Date
    Jan 2010
    Posts
    2,782
    Quote Originally Posted by Fredo View Post
    Starting to wonder if going this year is worth it.
    sounds like someone else
    '91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat

  14. #89
    sideways again... redcagepatrol's Avatar
    Join Date
    Apr 2002
    Location
    H-TOWN
    Posts
    4,270
    Quote Originally Posted by 85cj7 View Post
    water in front tires?
    that's how you get up big ledges
    Scott, FTAC '99
    '62 Nissan Patrol 4-seat Twisted Customs Buggy
    '89 "CJ-7" - Her trail rig
    '05 Toyota Tacoma 4x4 TRD - her daily driver...
    '08 Dodge 2500 Mega Cab 6.7 Diesel 4x4
    scott.schubring@williams.com

    The office sucks - I wanna go wheeling!

  15. #90
    Dead or alive... mudtoy67's Avatar
    Join Date
    Nov 2002
    Location
    Tx
    Posts
    4,545
    Quote Originally Posted by Fredo

    Finished some stuff, found some other stuff, still waiting on parts. The stuff in red still needs to be done. Starting to wonder if going this year is worth it.
    Let me help:

    Quote Originally Posted by Fredo View Post
    Lurch:
    -Rewire Control switches for fans, lights, OBA
    -Replace headlight switch
    -Replace entire cooling system (done)
    -Remove "rebuilt" radiator that is apparently bad and install new radiator*skip-add raw egg and ground pepper. It worked for McGuyver!
    -Wait for new radiator*skip-see above!

    -replace power steering pressure hose and return
    -get shorter belts for new alternator pulley
    -Disassemble front axle and repack wheel bearings *skip-they'll be fine
    -change gear oil in front axle *skip-unnecessary
    -grease all ujoints *skip-overrated

    -change engine oil and filter
    -modify oil pan for hydraulic ram clearance *skip-it will self-clearance
    -replace hydraulic assist ram
    -install new stereo head unit *skip-boom box
    -install different windshield frame and windshield *skip-wear safety glasses


    Trailer:
    - Weld deck plate that has broken loose *skip-lurch will hold it down
    - Get tire with nail in it patched *skip-nail is holding in the air!
    - Repack bearings and inspect suspension *skip-ok don't skip...this club has a history
    - Replace clearance lights on rear*skip-tape 12v xmas lights to rear


    Tahoe
    - Reinstall transmission, exhaust, etc associated with pulling out the trans.
    -waiting on trans to be finished being built
    -waiting on torque converter to be built and shipped in
    - change engine oil
    - rotate tires

    *Dad still has the burban, right?


    I'm sure there is some stuff I'm forgetting...
    Relax, you're gonna make it!
    Last edited by mudtoy67; 12-08-2014 at 04:24 PM.
    BDR

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •