Project: Find Brandini a Project

[BMFScout]

http://dallas.craigslist.org/car/721219779.html

[agjohn02]

http://dallas.craigslist.org/car/721219779.html

it doesnt have dual cases, longfields and a roll cage... and its too expensive.

[DRAGOONRANCH]

it doesnt have dual cases, longfields and a roll cage... and its too expensive.

a bump is a bump is a bump...

[Jackasic]

it doesnt have dual cases, longfields and a roll cage... and its too expensive.

maybe if you pay the skrilla you owe me I would be closer to buying one

[agjohn02]

when BTU sends the check you'll get it. wont take you very far towards a rig.

[rockfrawg]

when BTU sends the check you'll get it. wont take you very far towards a rig.

i think you underestimate the powers of brandini...however much it is will probably be a 50% down payment

[Jackasic]

see, roberts knows me well

[jerryg79]

single-story house

10' cielings

top-double plate in the walls at 8', wtf?

I'm guessing its eithe load bearing or shearwall? Studs went from there, through the rafters and into the roof.

Made installing in-wall speakers fun tonight...along with the crown

[Graystroke]

is the whole house 10' ceilings? Code I believe is 10' max for 2x4 and 12' requires 2x6. You can do what you are talking about if a topplate is put at say 9' and then have a 3' wall on top to meet code. I dunno why the would do that unless there is some weird code where you live.....If the hole house is not 10' I was thinking it wa part of a larger wall they tilted up and for some reason just added 2'

[DRAGOONRANCH]

this is colorado we are talking about here...

the builder will just blame it on the lack of oxygen up that high.

[jerryg79]

this is colorado we are talking about here...

the builder will just blame it on the lack of oxygen up that high.

ummm i must have moved

there is a "box" where it drops down in 1 corner, so maybe the roof goes all the way down and sits on it at the end at 8'ish. I'm guessing that's what it was now that i think about it. I couldnt figure out why it was taking so long to drill through until i stuck my finger in there and realized it was doubled up (and i was drilling into the stud above)

I just thought it was some wierd shear wall crap at first.

[DRAGOONRANCH]

:doh:

I must be gettin old.

[Jackasic]

how hard are the motors to rebuild? http://austin.craigslist.org/cto/933307879.html

[Jackasic]

or this: http://houston.craigslist.org/cto/925560927.html

or :http://houston.craigslist.org/cto/916628991.html

[Jackasic]

good deal? http://dallas.craigslist.org/ndf/pts/911331672.html