The TJ stands for Tate Jeep Buildup

**DRAGOONRANCH** · 10-28-2008, 11:13 PM

back it with a piece of wood you don't mind burning a little (will help to keep the weld from melting out so fast)

**Seth** · 10-28-2008, 11:22 PM

Originally Posted by AggieTJ2007

long arc your rod too it will help lower the amperage and heat

That's what she said.

**Seth** · 10-28-2008, 11:22 PM

Originally Posted by DRAGOONRANCH

back it with a piece of wood you don't mind burning a little (will help to keep the weld from melting out so fast)

That's what she said.

**DRAGOONRANCH** · 10-28-2008, 11:24 PM

Originally Posted by Seth

That's what she said.

right before she farted and passed out...

**Shaggy** · 03-05-2009, 02:46 PM

update. after sittling for about 3 months I put the oil pan back in. the rear main leaks a little but i will fix that later. I replaced the pinion seal in the 30 also.
a few weeks after having it back together i almost got stuck because i didnt realize the transfercase linkage came unhooked when I had the crossmember dropped. needless to say that has not been corrected yet. I doubt i will mess with it until the week before its next trip.

**Shaggy** · 04-06-2009, 12:00 PM

So I am off and bored today... I started the day off with getting an inspection and then pulled the front bumper off to finally put some paint on it. I think I am gonna crawl under it and fix the 4wd linkage finally... I am tired of shifting it into 4wd by crawling under the jeep and pulling on the linkage by hand.

**DRAGOONRANCH** · 04-06-2009, 12:38 PM

Originally Posted by Shaggy

I think I am gonna crawl under it and fix the 4wd linkage finally... I am tired of shifting it into 4wd by crawling under the jeep and pulling on the linkage by hand.

Please PM pictures and details of this modification to Brian Colman...

**AggieTJ2007** · 04-06-2009, 12:53 PM

do you still want that cage for it?

**Shaggy** · 04-06-2009, 01:02 PM

Well bumper is back on... transfercase linkage is back together. Only took 20 min should have done that a long time ago. and yes I still want the cage... PM me how much it is again and lets try and make arangements to get it.

**bcolman** · 04-06-2009, 02:17 PM

Originally Posted by DRAGOONRANCH

Please PM pictures and details of this modification to Brian Colman...

i cut a hole in the floor so i dont have to get dirty now

**Fredo** · 04-06-2009, 02:22 PM

Tate, what has this bumper gained you over a stock bumper? I mean, you could have drilled holes in the stock bumper to mount lights, and there are bolt on tow hooks for TJs. Am I missing something?

**uglyota** · 04-06-2009, 02:27 PM

[the dude] you're not missing anything, walter, you're just an a$$hole! [/]

**Shaggy** · 04-06-2009, 02:59 PM

Originally Posted by Fredo

Tate, what has this bumper gained you over a stock bumper? I mean, you could have drilled holes in the stock bumper to mount lights, and there are bolt on tow hooks for TJs. Am I missing something?

no I just never figured out how I wanted the ends... so I never built them

**Shaggy** · 04-06-2009, 02:59 PM

and i didnt have a stock bumper either

**DRAGOONRANCH** · 04-06-2009, 11:07 PM

Originally Posted by bcolman

i cut a hole in the floor so i dont have to get dirty now

I bet you will find this to be your best mod yet.

Originally Posted by uglyota

[the dude] you're not missing anything, walter, you're just an a$$hole! [/]

so true, so true...

Thread: The TJ stands for Tate Jeep Buildup

Thread Tools

Rate This Thread

Display

Posting Permissions