...
Is that a rope limb riser?
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
dual purpose, it also has a stake for front yard dog entertainment
...
So I converted the warn 9000i to a regular 9000, replaced the burned up warn motor with a db electric replacement, threw out the warn solenoids and replaced them with an albright contactor, and now I've got to do something about the control. I can't find the warn control plug anywhere except for warn, and I really don't want the cable draped over the hood all the time. I can't find a dash mounted rocker switch that doesn't look like ****, this is the third best option. Its kind of chinesey, so it might not last, but its cheap.
http://www.roadlessgear.com/Merchant...J/PROD/R/RG630
...
12voltguy dash panel??
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
Originally Posted by Sharpe
Instead of using the plug on the winch, can you wire it into the contactor box? It's not like you will take the winch off much, then you can also have the plug in the front if you want to use it while you are out of the cab.
Like Tommy showed those switches are pretty good, I picked up a momentary double pole at radio shack and made a little plate with indicator lights, it is on page 226 of my thread.
http://www.tamor.org/forums/showthre...Klogger/page16
Also, any power window switch can be made to work like a winch switch.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Karl there is no plug on the front with the 9000. I could take the socket off the 9000i case (that is missing the dust cap) and mount it somewhere outside , but I think the wireless will be good enough. If it breaks in some kind of winch requried for survival scenario I can start ripping speaker wire out and build a switch out of a coconut.
...
What is so offensive about this?
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
I agree. I'll have one of those when I get the ****tybilt going again.
That reminds me, I have your dust cap, This year at Clayton during the 8-point spring debacle we had to use your winch, the retainer strap was already broken, I removed it to plug your controller in, and put it in my pocket, it has been floating around in my truck with the intention to return it to you some day. Next time a Dallas feg is in Houston I will try to remember to send it home.
Side note, can you use an old school 4 prong plug? those are just 4 pin circle trailer plugs that you can get at Vatozone
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
I could. I think I'll just hide the warn plug somewhere behind the grill
Do you know if superwinch controls are wired the same as warn? This is cheaper than buying the replacement socket from warn, and I'd end up with a spare control
http://www.etrailer.com/Accessories-...ch/SW2271.html
...
you working on it tonight?
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
maybe, I need to start tearing the axles apart. I got the correct seals for rovers with oil bath hubs and need to swap out the stock ones.
...
I gave in to the dash mounted control, though the wireless works fine.
...
Posting Permissions
Reply With Quote