If i did it over again with my jeep I would do the following things in this order.

- Good front bumper with winch
-Good Rear bumper with tire carrier. You will drag the rear bumper alot with 33's even 35s and a stock wheelbase
-Better skidplates
- Upgrade upper and lower control arms to adjustable with flex joints
- Reinforce all control arm and track bar mounts. A few small pieces of plate to box in the mounts and better tie them in to the axle tube is all that would be needed.
-Comp Corners and rocker gaurds. 5x3 angle iron makes quick and easy rocker guards.
-Front lunchbox locker or ARB (if you have 3.73 the front will use the same carrier if/when you regear)
-Rear detroit or ARB and regear (with the limited slip D44 you can at a lunchbox locker and you will have to change carriers if/when you regear)


There is plenty more that you could do but your jeep should be trail ready for most any Colorado trails except Carnage Canyon as it is now with the addition of a winch. We had an IFS 4runner on 35's follow us all of the way up Holy Cross.