Clayton Christmas Carnage 08 (Rooms and Rides Thread)

[JB]

UPS tried to deliver the d-link to the wrong address. I really hope it is there when I get home. Still need to drill out the pitman arm and rig up some sort of bumpstop on the pass. side. Fill up a tire, load up spare parts, check trailer tires, load it up on Wednesday and leave sometime Thursday. I want to miss Dallas traffic, but do not want to be in Clayton stupid early either if we are not going to wheel. What time are you thinking Cooke?

[KrazyKarl02]

just need to get the jeep inspected (today sometime)

Damn, I forgot to get the klogger inspected...

[KrazyKarl02]

I would not worry about the half top Fred. Weather looks to be low in the mid 30's with high's nearing the 60's. Friday 0% rain chance, Saturday 15%.

I got the Chevy ready to tow. I need to check the bearings on the trailer and bleed the brakes on The Klogger. Going to do that tonight. Should be ready to drink, err I mean wheel...

[breckboarder55]

I still need to finish the rockers, pack the Jeep, and beg my mom to front me money for my next pay check... Since it comes in on the day I'm gone... I won't be able to go cash it. errrrr...

Maybe I will just call up a friend at the bank and see if he can cash it and then deposit if for me?

[DRAGOONRANCH]

Gonna load the tools and welder up in te a.m. and should be ready to head to CS tomorrow evening and will get groceries when I get there.

[robertf03]

Other than that, it'll be a matter of throwing tools and spares in and loading trailers wednesay night. How is everybody else looking?

bleed defender brakes one more time

finish rear panel/high lift mount

and definately not do the old switcheroo on disco inspection stickers, that would be illegal and immoral

[8Runner]

edit: decided to make a separate thread for trails discussion instead of gumming the rooms & rides thread up.

http://www.tamor.org/forums/showthre...622#post213622

[redcagepatrol]

sprayed clear coat tonight, looks good. Will put all of the hardware on tomorrow and install

[J Cooper]

Ryan
now is when you can start looking at the weather forcast

looks good... http://www.weather.com/outlook/trave...opnav_business

off topic but look at houston's forcast today...
do you think that would happen here?

[8Runner]

Snowing at my place this AM. However, the weather this weekend in Clayton is looking very good - weird almost since there is near freezing weather on Weds and Monday, but Thursday-Sunday is considerably warmer.

[jerryg79]

we get weather like that once a year. most times it never pans out.

[breckboarder55]

Need to buy the right sized bolts, paint my sliders, cut my flares, fix my heater, and grind my skid plate down...

One final left woooooooooo!

[FJAggie07]

Need to buy the right sized bolts, paint my sliders, cut my flares, fix my heater, and grind my skid plate down...

One final left woooooooooo!

Fastenal in Bryan, Rustoleum, Sawzall, Fawk that just pack a jacket, Grinder.

sounds like you have some pretty easy solutions. Yay for end of finals

[8Runner]

I just talked to the A&A - they are still full up, though he did ask me if Ed still needed his room. I told him no

He said he had some firewood, but not enough, so suggested we bring some if possible. I would be glad to haul it under the buggy - does anyone have any in town?

Regarding the xmas parade - vehicles that want to be in it need to meet at the school at 5pm Saturday. Don't forget your "decorations" and candy in toilet paper tubes.

Also, another plug for the Gift Exchange - don't forget to bring something!

p.s. Ed, he actually remembered you were off in Iraq and was glad to hear you made it back.

[breckboarder55]

I can not figure out what is wrong with my heater for the life of me... Can some one help me out?


Oh and I still need to use someone's grinder...